Press this key from the home screen or from the partition menu if your installation has several partitions.
After a few seconds, the system starts the exit delay.
All the detectors in the partition will be activated at the end of the time delay (motion sensors and perimeter sensors).

Press this key from the home screen or from the partition menu if your installation has several partitions.
After a few seconds, the system is disarmed and the sirens/beeps stop in the event of an alarm.
A second press will be necessary in the event of an alarm triggered to clear it before being able to arm the system again.
Disarming the system within the time set by your installer cancels the alert to the remote monitoring center (30s by default).

Press this key from the home screen or from the partition menu if your installation has several partitions.
After a few seconds, start of the exit delay (without keypad beeps).
All perimeter sensors (door/windows) in the partition are activated.
No motion sensors (passive infrared), including those with the "Armed in night mode" option selected, are activated.

Press this key from the home screen or from the partition menu if your installation has several partitions.
After a few seconds, start of the exit delay (without keypad beeps). All perimeter sensors (door/windows) in the partition are activated. The volumetric detector(s) (passive infrared) whose "Armed in night mode" option is selected will be activated.
Note: This button only appears if at least one detector has been configured "activated in night mode" by your installer.